REMOVAL GUIDE

  1. To remove or reposition your Talaya tiles, gently press one hand into the short side opposite the tile handle, and lightly lift the tile handle with the opposite hand, using a rolling, peeling motion to gently separate the tile from the 3M ® Command ® Narrow Picture Hanging Strips.
  2. Remove each 3M ® Command ® Narrow Picture Hanging Strip by slowly pulling the pull tab PARALLEL to (never perpendicular, or AWAY from) the wall surface. This will cause the strip to stretch and slowly release from the wall surface. DO NOT remove or tamper with the clear, permanent, integrated interlock strips on the tile. Should damage occur to any of the clear interlocking strips, do not use the tile, and contact Talaya for support.
  3. To rehang tiles, affix new 3M ® Command ® Narrow Picture Hanging Strips to each integrated interlocking panel, and repeat the steps outlined in the Hanging Instructions. DO NOT reuse 3M ® Command ® Narrow Picture Hanging Strips. Dispose of all used 3M ® Command ® Narrow Picture Hanging Strips properly.